Metal Foam Screen Pump Intake

Application

• Metal foam screen pump intake prevents ingress of mechanical impurities with cross section exceeding 0,3 mm into the pump.
• Metal foam screen pump intake is mounted between seal and lower pump (or gas separator);
• Mechanical impurities are trapped when formation fluid goes through two-layer Ni-foam screen;
• It is sized to match pump operating capacity.

Advantages

• Metal foam screen pump intake increases ESP efficiency and improves reliability;
• It increases ESP operation time between failure; It can be completed with a plate valve upon requirement.

Specifications

O.D., inch	3,62; 4,06
Length, ft	9.8; 13.1; 16.4; 19.7
Rated flow capacity, BPD	190 - 1766
Maximum flow capacity, BPD	284- 1766
Filtration rate, mkm	250, 350, 500
Weight, Lb	179 - 377

	Slotted Screen Intake
	Metal Foam Screen Pump Intake
	Downhole Metal Foamed Screen Filter
	Ni-foam Screens